UNIVERSAL 492lb "TENSION BOOSTING KIT" for BOWFLEX . See Model Listing

Description

!!FEEDBACK!!
Item works great: ingenious design.
Buyer:
len_3084
(
2
)
!!ROD BOX(not included) SHOWN FOR ILLUSTRATIVE PURPOSE ONLY!!!
!!IF YOUR POWER ROD BOX DOESN'T LOOK THE SAME AS THE ONE IN PHOTO YOU ARE ORDERING THE WRONG ITEM!!
(AND IT WILL NOT FIT YOUR MACHINE PROPERLY)
!!!180 DAYS WARRANTY!!!
FEEL THE DIFFERENCE...ENJOY THE WORKOUT WITH YOUR NOW "210(+42LBS)/310(+62LBS)/410(+82LBS)MACHINE"
(WILL ALSO FUNCTION AS A REJUVENATOR/KEEPER)
COMPATIBLE MACHINES::
Blaze, Classic, Elite, Pr3000, Sport, Ultimate 1,2, Xceed, Conquest, Motivator.2, PR1000, Extreme(all).
Kit Contents: (4) Elevation  Tubes..(1) Heavy Duty Companion
!!ROD BOX(not included) SHOWN FOR ILLUSTRATIVE PURPOSE ONLY!!!
!!!180 DAYS WARRANTY!!!
STRAIGHT POWER RODS IS A NECESSARY INGREDIENT FOR THE PROPER RESULTS OF THIS KITS FUNCTION(If your power rods are bowed, simply rotate them 180 degrees  so that the bowing is towards the power rod box center)
THIS WILL GIVE YOU A SUM TOTAL OF
42 to 82
additional TENSION WORKOUT POUNDS WITHOUT  THE ADDITION OF ANY MORE POWER RODS..
INSTALLATION INSTRUCTIONS: Remove all of the power rod end caps.. Install the
2
large diameter tubes
on your first set of
50's and the 2 small diameter tubes on the last set of 5's
,
Next  insert all of the power rods into the Power Rod Rejuvenator//Companion. Lastly reinstall the power rod end caps. Installation is now complete..
THIS KIT IS NOW A PERMANENT AND BENEFICIAL COMPONENT OF YOUR WORKOUT MACHINE
OPERATION INSTRUCTIONS: When you are not using your machine the Heavy Duty Power Rod Rejuvenator//Companion (self supporting) will remain at the top of the rod stack keeping them supported and STRAIGHT..When you decide to workout just lower the Heavy Duty Power Rod Rejuvenator//Companion until it rests on the Elevation  / Leveling Tubes..