TATIANKA Chisel Set of 12 for woodcarving

Description

Woodcarving kit ‘Tatianka’
:
Knife K-2;
Semicircular chisel’s: #6, 17, 11, 10, 33, 8, 1, 2, 4, 19;
V-chisel #71
It is basic starter set for woodcarver especially for relief carving. It is also good for carving sculptures and graving.
This set is also the right choice if you learn by our ‘Tatianka’ guideline books and woodcarving lessons. It’ll be enough to make your first steps in ‘Tatianka’ technique woodcarving.
This set is designed to use for very accurate art woodcarving of small and medium shapes. Please find work examples in our virtual museum - link to website museum section is bellow. These tools for woodcarver are just like needles for silk embroidery.
It’ll be wonderful present for a person who is planning or wants to try woodcarving.
All 12 tools of the set are packed in special wooden box where each knife is fixed in its spot. So you get storage box, keep knives in the box it is safe and convenient.
These tools are specially made to work on following woods: basswood, linden, alder, aspen, poplar, cedar. Tatianka chisels are good for woodcarving without use of hammer or mallet only manual power.
Chisels make visible cuts and you get clear-cut relief.
Angle of razor is about 15 degrees, that gives opportunity to cut very thin chips easily with minimum pressure just like sharpening pencil.
These tools are perfect for art carving, not for poking. It’s great choice for relief carving of superb artistry.
Not only woodcarvers use these tools. Those craftsmen who work with leather, paper, gesso and who cut something from vegetables and fruits also appreciated the quality of the tools.
Knife K2 is perfect for chip carving, carving geometric pattern of any complexity and for making details of your work.
This knife for woodcarving is basic in carver case - to cut triangles popular in geometric carving, to cut a background and to make cuts, also with this knife you may form triangular recesses on the edge of your wooden product.
Knife is easy-to-use. It’s great to carve circles with this knife or make conic cut, just move it in your hand. With no change of hands and no move of wood you may cut in 360 degrees. This knife has sloping blade with angle of 45 degrees. It is the most popular knife - the basic tool for a woodcarver no matter you are the beginner or professional.
V-parting chisel is for carving lettering, wrinkles, animal fur, hair, ornamentation and micro detailing, for sculpting figures.
#71 – V chisel has a 60 degree angle, 2mm  (0.08 inches).
Tools are razor sharp and ready to use once you receive them. The blade is already stropped to a mirror finish.
Beechwood handle has varnish finish so it stays clean and looks good.
Dimensions
Кnife K-2
Total length - 155 mm (6.1 inches)
Handle length - 110 mm (4.33 inches)
Blade length - 45 mm (1.77 inches)
Width of the cutting edge - 38 mm (1.5 inches)
Steel thickness - 1.8 mm (0.051 inches)
Handle gauge - 10 mm (0.39 inches)
Chisels
Total length - 170 mm (6.69 inches)
Handle length - 100 mm (3.94 inches)
Blade length - 70 mm (2.76 inches)
Width of the cutting edge
№6 - 7 mm (0.28 inches)
№17- 14 mm (0.55 inches)
№11 - 7 mm (0.28 inches)
№10 - 11 mm (0.43 inches)
№33 - 20 mm (0.79 inches)
№8 - 8 mm (0.31 inches)
№1 - 2 mm (0.079 inches)
№2 - 3 mm (0.12 inches)
№4 - 5 mm (0.2 inches)
№19 - 14 mm (0.55 inches)
№71 - V chisel a 45 degree angle 2mm  (0.079 inches)
Steel thickness - 1 mm (0.039 inches)
Handle gauge(in widest part) - 20 mm (0.79 inches)
Materials
Blade material: Highcarbon spring steel
Carbon steel 65G (coil-spring).
65G steel - an analog of the American types 1066, 1566, and G15660. It is characterized by high strength and durability, has great cutting characteristic.
Index ‘G’ stays for alloying element manganese (Mn).
Index ’65’ stays for percentage of carbon in alloy in hundredths.
Steel hardness is 58-60 HRc.
Cap: polished brass.
Handle material: Beech tree, varnish finish.
Numeration is made on metal part of the tool on the inner or outer side.
Box dimensions
290mm*200mm*50mm (11.42*7.87*1.97 inches)
Care instructions:
To keep knife sharp you need stropping it with polish compound regularly.
Keep your tools in special boxes or other places so that sharp ends don’t touch each other and don’t contact with hard surfaces.
Made in Russia.
Feel free to contact me any time with any question.
Buy it now and you’ll never regret!
Follow us on Facebook: https://www.facebook.com/tatiankacarving/
Follow us on Instagram: https://www.instagram.com/tatianka_rezba/
Follow us on Youtube: https://www.youtube.com/channel/UCRjXWj_NWYGtV8bv5bOzWvQ
Website: https://tatianka.ru/museum/